Well Water Tastes and Smells Funny

There are many reasons household water can have an odor or taste that is different than expected. Here are a few things to consider.

Smell: Before you do anything, you should run the water for a few minutes (this will help with determining where the smell is coming from). If the smell is coming from all of your water faucets then there is an issue with your water supply. Most smells come from the presence of bacteria or metals (iron, copper, and lead) in your water.

If odor comes from one faucet and it goes away after a few minutes (or not) then you have plumbing-related issues. There is somewhere in your plumbing where the water flow is not smooth and organic material has allowed bacteria to grow, or the pipes are made from a material that releases material slowly and is trapped until it builds up to a level you can detect by scent. If the smell is detectable in the hot water side only, then you potentially have an issue with the magnesium rod in your hot water heater. For these issues you will need a plumber.

Appearance: This is almost always due to sedimentation or scale (the material that collects on the insides of the pipes bringing water to your house). Sedimentation comes when water systems are flushed by the water provider (or well system) or when the water system is not used very often, allowing the sedimentation to build up. Opening your faucets and letting them flush out will usually take care of the problem. The release of scaling is due to a change in the chemistry (pH) of your water and will continue to look funny for a longer period of time. We can test your water for the amounts of sediment present and also its pH. If there is a change, you need to inform your water provider because contaminants can be released into your water.

Taste: is the most difficult to determine because of the natural amount of minerals in the water and the additives that your water provider may add to your water (such as chlorine). Taste is an individual preference—what bothers you may not bother others. Most tastes are actually a reaction to the odor of the water (the tests for which are mentioned above). Bacteria, algae, metals, and chlorine can all lead to different tastes in your water. There are many filtration systems available that will change the flavor of your water by removing the above (which may also remove potential contaminants).

The safety of your drinking water may not be affected by an adverse smell, appearance, or taste. If you need help tracking down what's going on in your water, contact a project manager at [email protected] for more guidance and sampling instructions.

Join us for more information

about the environmental laboratory industry, plus events we're attending and hosting.

Biotic Ligand Model

The Biotic Ligand Model (BLM) takes into account many environmental conditions in order to determine if a metal exists in a form or concentration that is toxic to aquatic life.  Toxicity is usually based upon the dosage of whatever it is that we are looking at.  At...

SVL Analytical celebrates 50 years of science, family and mining

From geology exploration to environmental compliance, SVL attributes its longevity to hard work and an adaptive mentality. The laboratory may be an unrecognized partner—that is until something goes wrong like a spill, a breach, a new compliance rule. Our data users...

TCLP or SPLP on a Solid Sample

Why is this TCLP/SPLP on a solid sample a common question? The main reason is that people don't understand the difference between characterization and hazardous determination.  The EPA developed the TCLP Program to determine when certain materials have to go to a...

What does Cation/Anion Balance Mean?

Introduction to Cation/Anion Balance (CA Balance) Water that is potable (drinkable) should be electrically neutral.  This is determined by taking into account results from the following analytical testing: pH, conductivity, total dissolved solids, and other analytical...

What's the difference between accuracy and precision?

Have you ever wondered what the difference between accuracy and precision is? The classic example is this: I shoot five arrows from a hundred yards and they land either in or just outside of the bullseye.  The consensus from the gallery will be that I am a very...

Understanding Control Charts

What are control charts? Control charts are a visual depiction of ongoing data points that various statistics are applied to.  The EPA used to require a laboratory to adjust its spike acceptance recovery percentage based upon how spikes were recovered over time...

How Low Can You Go – Well No Lower Than The MDL

There is always confusion on how low a lab can go when it comes to what their instruments can detect.  The EPA and TNI came together and changed how Method Detection Limits (MDL) are established for an instrument or group of instruments. They wanted to account for the...

Significant Figures Use by Laboratories

What determines the amount of numbers you see on your report? Each test that we do has a level of sensitivity associated with it.  Tests that you can do by visual inspection have the lowest sensitivity and are usually reported in whole numbers in a range of say 1 to...

The Argument on "Total" Metals

Why is there still an argument about which digestion method should be reported as "total" metals? When you're looking at an old QAPP, permit or analytical report, you might have noticed that there were different listings for how the metals were to be identified and...

bighiseens.blogspot.com

Source: https://www.svl.net/2020/07/my-water-tastes-funny-what-should-i-test-for/

Share this post